Pc5010 display master code pdf#
Pc5010 display master code code#

format (HH:MM), followed by the date (MM:DD:YY). When using the PC5500 keypad,use the Scroll keys to find the menu option then press * to select it.ģ.

Pc5010 display master code code#

Press * 6 plus your Master Access Code to enter User Functions. The 'Trouble' light will stay on until the trouble is resolved.ġ. If using the PC5500 keypad, you can use the Scroll keys to scroll through a list of trouble conditionsģ. Any that are currently affecting the system will be illuminated. If pressing *2 Shows 1, press the 1 key and it may then show these trouble code(s). Note: A display of 1 refers to a branch of 8 further trouble codes. To determine which device has a low battery: Press 7 again to view zone(s) with low battery, press 7 again to view hand held keypad(s) with low battery, press 7 again to view wireless key fob(s) with low battery) The keypad will display a number from 1 to 8 to indicate the particular trouble, as follows: If this does not reset the smoke detector, please look here for additional information regarding smoke detectors.Ģ. Press and hold the Reset button for 2 seconds, or press * 72 on the keypad. To clear the alarm memory, arm and disarm the system. If using the PC5500 keypad, use the Scroll keys to view the sensor(s) in alarm memoryĤ. Press * 3 to view which sensor(s) generated the alarm. Lights to indicate that an alarm has occurredġ. To turn door chime on or off press and hold the CHIME key for 2 seconds, or press * 4. īypassed zones are automatically canceled each time the system is disarmed and must be bypassed again, if required, before the next arming. To exit bypassing mode and return to the Ready state, press #. The 'B' will disappear from the display.ĥ. When using the PC5500 keypad, you can also use the Scroll keys to find the zone, and then press * to unbypass the selected zone. To unbypass a zone, enter the 2-digit Zone Number(s) of the zones to be unbypassed. The keypad will display a 'B' to indicate zone is bypassedĤ. When using the PC5500 keypad, you can also use the Scroll keys to find the zone to be bypassed, and then press * to bypass the zone. Enter the 2-digit Zone Number(s) of the zones to be bypassed (01-64). The keypad may display 'Scroll to Bypass Zones'.ģ. Press 1 then your Access Code (if required). The keypad may display 'Press * or Zone Bypass'. If this happens hit # key, and try again.ġ. If your code is invalid, the system will not disarm and a 2 second error tone will sound. Press and Hold the Away key for 2 seconds or enter the Access Code or hit * 0Įnter your Access Code to disarm anytime the system is armed. Press and Hold the Stay key for 2 seconds or enter the Access Code and do not leave the premises. Click Thumbnail for expanded keypad view.

Pc5010 display master code pdf#

For complete instructions, click the above link for the pdf manual.